tranny issue wr 250 83

when the cases are together only selects 1 n 2 3. when apart selects all gears. why is this all parts good , going to try last resort .... replace the shift forks. will this cure problem? any help will be appreciated thanks all

See if you can get a blow up of the tranny assembly and make sure you don't have something reversed or a shim out of place. I did that once and had a gear reversed.

do u have any kind of manual or similar ?

Try www.halls-cycles.com

under which section ? thanks

Go to Parts and Accessories

Go to Husgvarna Parts.

scroll down to 83

Darin

cheers all seems to correct . so ill go for replacement shift forks

would the replacement shift forks solve shifting issues?

I have the Husky shop manual somewhere at my other house. I will get over there sometime this week and see if I can find it.

cheers tommie

i found it a bit stiff to engage gears when i rebuilt my 500 motor but when put a battery drill with socket on it and connected it to the out put shaft ( front sprocket) it engaged no probs at all .
might be worth a go.

Sorry it took me so long but I didn't get a chance to go over there till today. I did find the manual so I will scan the transmission section as soon as I get a chance. I will try to get it done in the next few days.

ok tommie. did u get the manual? still problems with it . all works fine with the cases apart. when u put back together it wont select 4th 5th and 6th please help