Trick to removing the plastic?

Discussion in 'TR650' started by Lawtonco, Mar 3, 2013.

  1. Lawtonco Husqvarna
    AA Class

    Husqvarna Motorcycle:
    Terra 650 as 3/1/2013
    Other Motorcycles:
    BMW GSA1200, 2002 Goldwing 1800A
    I like to think of myself as a reasonably intelligent person, but is there a trick here? It seems to want to hang up here it attaches to the black lower front radiator cover. I don't want to break anything.
  2. Trapperj Husqvarna
    AA Class

    Location:
    Knoxville TN
    Husqvarna Motorcycle:
    Tr 650 Strada
    Other Motorcycles:
    R1200 GS RALLY..KLR 650..Zrx 1200
    Yes I experienced the same. It came out...not sure other than all the planets being in alignment what caused it to come free.lol. I just knew it was going to break...but it didnt ..it came out fine. Once I had it apart I was sure I'd find the answer & see just how it snaps together...but I didn't. Good luck. Maybe someone else will chime in with a answer.
  3. Kenneth Webb Livin' It Up!

    Location:
    Tucson AZ
    Husqvarna Motorcycle:
    TE630 TR650 Terra TE310R
    Other Motorcycles:
    Yamaha WR250R, GoldWing, Africa Twin
    When you get all the fasteners out, get a flashlight and look down into the front where the hangup is. The pieces are clipped together and you should see to top of the "clip". It's a rectangular thing with a beveled top. Just put a large flat blade screwdriver between the plastic and the beveled top and twist. The panel will pop out, sometimes with a loud noise. I always think I've broken it, but not so. Just do it.

    K
  4. Lawtonco Husqvarna
    AA Class

    Husqvarna Motorcycle:
    Terra 650 as 3/1/2013
    Other Motorcycles:
    BMW GSA1200, 2002 Goldwing 1800A
    Thanks, kind of scary waiting for something to snap.

    S.