Turn signals flashing

Discussion in '610/630' started by KLOC, Feb 3, 2011.

  1. KLOC Husqvarna
    AA Class

    Location:
    Edmonton, Alberta
    Fired up the 630 today and found that when I signal either left or right neither of the front signals flash, but both rear signals flash together ... like emergency flashers.

    Disconnected the battery but there was no change.

    The signals were working fine a month ago and the bike hasn't been ridden since.
    Anyone else experienced this?
  2. moto66 Husqvarna
    A Class

    Location:
    England
    Never heard of it KLOC. Sounds like you've got a short there somewhere?
  3. KLOC Husqvarna
    AA Class

    Location:
    Edmonton, Alberta
    Err ... Turns out I'm an idiot.

    When I put the endurance ice tires on, I took the Lynx fairing off and returned to the stock lights.
    I had the two signal light connectors coming out of the harness plugged together and the two signal lights attached to each other.
  4. moto66 Husqvarna
    A Class

    Location:
    England
    Sound! And well found. No idiots here in my book.