Can Somebody point me in the direction of a thread for good looking turn signals for the 610? I bought some low profile squid LED ones, but their lack of brightness makes them pretty useless.
I would recommend you hit up Sicass Racing. I got some flexi-LED's from them and the relay. I also had this page bookmarked from Electrosport. Here's a pic from the front (I've since lost the Cycra guards and so the turn signals are in closer (by 15mm) now)
I added some squid-like low profiles ones, but I'm not super thrilled with their brightness. Glad I didn't drill anything to install them.
Well, with the stocker, I tried hard not get caught out on the road at night. With the BD, I don't mind riding at night, but I try not to get caught out on the trail at night. If you want to be able to ride the trail at night, I'd consider something else.
The only time I do trails at night is when I'm scrambling to get home. I think I'll give the BD a try. Thanks.
http://cgi.ebay.com/ebaymotors/ws/e...witem=&sspagename=STRK:MEWNX:IT#ht_7948wt_874 waiting on a pair of these
If you want bright bulbs, these work well and are relatively inexpensive. They have long flexible stalks that so far have been hard to break. They come in 2 or 3 wire versions. I use the 3 wire version, wiring the 8W filaments on the front for some battery load and better visability. The turn filament is 21Watts. http://www.wps-inc.com/wps/WICATALO...325 &SISID=A515&PRVPAGE=570&PAGEGO=Page# Model 60-1378 or 60-1379. Around $28 for the pair. The Buell lights are good too, but harder to get now that the dealers are few.
You can order the stock Husky European signals for around $60 for a set of four. They are very bright, plug right in and look like little arrowheads.
