1. 2 Stroke Husqvarna Motorcycles Made In Austria - About 2014 & Newer
     TE = 2st Enduro & TC = 2st Cross

TE/TC TX300 Magura Clutch Master wonky

Discussion in '2st' started by Cosmokenney, May 18, 2017.

  1. Cosmokenney Husqvarna
    Pro Class

    Location:
    North Auburn, CA
    Husqvarna Motorcycle:
    '17 TX300
    Other Motorcycles:
    Yamaha FZ-09
    Anyone else having problems with the little rubber boot on the push rod that the clutch lever pushes into the master cylinder? Mine keeps popping off. It's filled with grease (from the factory), and is just going to trap dirt and water.

    Any idea how to keep it on there?
    Cosmokenney, May 18, 2017
    #1

  2. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    I super glued mine a while back when replacing lever. Not ideal but it doesn't move! Seems once you touch em they never the same?!
    shawbagga, May 18, 2017
    #2
    Cosmokenney likes this.