250-500cc Un breakable levers

I have looked everywhere in the uk and can't find any unbreakable levers for my cr 250 2004 does anyone know where I can get some?

I've got some Zeta ones fitted to my 11 WR. Maybe look at replacing the lever and clamp assembly.

I have the ASV setup on my clutch side, clutches are universal when you do the perch, but you might need to do some serious adjustments with the cable and throwout. I run cycra probends though, so I've never tested their unbreakable-ness I like the lever feel though.

Don't mean to sound thick but do you mean if I bought a clutch lever and perch say for a RM it would fit my husky cable???

I have the Sunline ARC flex levers on my 2010 WR 250. The brake side is the same as in the KTM's and on the clutch side I put the lever and the clamp dedicated to yamaha yzf. The lever fit husky cable. Here you have some photos: http://www.bikepics.com/pictures/2521382/ ; http://www.bikepics.com/pictures/2523463/ ; http://www.bikepics.com/pictures/2523438/

Yeah, this is the one I have http://www.rockymountainatvmc.com/p/43/53/218/967/-/-/194984/

The stock replacements have some slightly different leverage ratios, but the above work. With the quick adjust I had to adjust every thing I could on the cable, but the lever feel was worth it for me. That domino one would rub my fingers raw.

I´m riding the Zeta FP-M Pivot Clutch perch an the same brake lever on my ´13 WR125. Fits perfect, haptics is much better than the "normal" Zeta levers or e.g. ZAP. Best alternative in my opinion is the ARC Axis!