1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

250-500cc Updated plastic

Discussion in '2 Stroke' started by Emil Hansen, Oct 27, 2014.

  1. Emil Hansen Husqvarna

    Husqvarna Motorcycle:
    WR250
    Other Motorcycles:
    Honda CBR1000RR Fireblade
    Hello again guys.

    I want to modernize the look of my bike a little. So I have bought a new head light and front fender.
    But I would like a new rear fender as well.

    Tha one thats on mu WR250 from 2000 is like this:
    [IMG]


    And would like this model rear fender:
    [IMG]

    BUT! In black.

    What model rear fender fits my model?

    I have found this picture: But I'm not sure that the info is right.
    [IMG]


    I hope that some of you can confirm that these models share the same rear fender. :)


    Thanks.

    Emil Hansen
  2. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    That fender might bolt on but it will not fit with the other plastic very well, specifically the side panels.
  3. juicypips Husqvarna
    Pro Class

    Location:
    gloucestershire
    Husqvarna Motorcycle:
    wr 360. 2002
    Other Motorcycles:
    Gas Gas TxT 300, Yamaha wr250f
    Get a complete set they should bolt right up, ufo or acerbis will do em.
  4. huskylove Husqvarna
    Pro Class

    Location:
    norcal
    Husqvarna Motorcycle:
    1999 cr125 in progress
    I did the same, it worked okay, but the fender broke firsst ride. I did loop it tho ;)
  5. Emil Hansen Husqvarna

    Husqvarna Motorcycle:
    WR250
    Other Motorcycles:
    Honda CBR1000RR Fireblade
    I have a complete set of new plastic for the '00 model.. But a little looks-update would be nice. Maby '05 side panels/plastic next :)
  6. steadydirt Husqvarna
    AA Class

    Location:
    Ontario
    Husqvarna Motorcycle:
    2007 2002 wr 250 1994 wxe 250
    Other Motorcycles:
    fj 1100 cb500 cb350 rt 200 xs 650
    double check the subframe- believe there is a small change to '02 up to at least '05