Verify Torque spec please on SMR 510 manual is contradicting

Putting some new rubber on, bike is a '06 SMR 510. At one spot in the manual it says the torque spec for the front and rear axles is 104.8 ft/lbs (this is in the torque specs section) But in the "removing the front wheel" section, it says to torque the front axle bolt (the one with the 12mm allen) to 38 ft/lbs. And in the "removing the rear wheel" section is does not mention torque specs at all. Please help
I know on my dirt bikes the torque specs were around 80 ft/lbs front and rear....

I don't have an SMR but I have the 09 workshop manual which covers the SMR. I suppose it could have changed since the '06 but FWIW in this version the "Torque Wrench Settings" section doesn't say 104.8 ft/lb anywhere for the front axle, it only says that for the large nut on the rear axle.

For the front axle it mentions:

Front wheel axle fastening screw (SMR) M10x1,5: 38 ft/lb

Front wheel axle fastening screw M6x1: 7.7 ft/lb (don't know whether these apply to the SMR but they're the bolts which pinch the clamp around the axle on the TE)

Hope this helps.

ok cool thanks thats what I figured, cuz when I took it off it didnt feel like 104 ft lbs. Thansk for clarifying