TE/TC What gearing to run?

I'm still running my stock gearing, what gearing are people running for the tighter stuff?

I run 13/48 which is between 13/50 and 14/50. It allow me to use 1st more.

I am running 13/48 on my FE501. I ride a lot of single track , much of which I am actually making that single track myself here in the AZ desert, lots of rocks and cactus you may have to zig-zag your way through and it makes first gear more useful as well, sand washes makes first gear better too hardly even notice its a little bit taller in the other gears when on the throttle never any other issues with it.

It'll still crawl at walking speed up just about anything, even heavy square edged rock strewn hills with out fear of wheel spin. Clutch modulation and throttle control is a must but torque is phenomenal. No running start needed.

It will still buzz down the highway at over 100mph easy and on some of the smoother dirt roads and good out on the 2 tracks at over 80 +.

It still Lofts the front wheel easily in fourth gear too so it'll hop over or across just about any thing you may come up to at that approaching speed.

OEM on the 14 TE300. lots of slow 2nd gear clutch slip smooth the drive unload chassis stuff.

I never actually checked, what's the stock gearing on a 15 te300?

Mine came with 13/50

The stock gearing is great for tight single track. For desert riding I'm looking into either a 14-48 or 15-48. The front sprockets are pretty cheap. I'll buy them both and report back which works the best for WOT desert racing.