1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    TE = 4st Enduro & TC = 4st Cross

What oil in a TE250 2008

Discussion in '4 Stroke' started by turbo100, Sep 20, 2023.

  1. turbo100 Husqvarna
    AA Class

    Hello,
    The manual calls for a 10W-60 engin oil but I only have 10W-40 syntethic oil where I am located.
    Would I do best in awaiting a mail delivery for the 10W-60 or should I just go with the 10W-40, I have no clue what previous owner used.
    I will not race it or drive competitive in any way.

    What do you guys suggest?
  2. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    You might want to try a turbo rated 20-50 in that bike. That is what I used in my 07 450. I didn't even use synthetic, because my local dealer told me that the synthetic oil that was recommended would make the clutch slip.
  3. flyingbob Administrator

    Location:
    USA
    Husqvarna Motorcycle:
    01&02WR360_02WR250_02CR250_12WB165
    Other Motorcycles:
    01 VOR400_07 TM450_22 GG250_07 Tuono
    I always used Castrol Activo 20w50 in that series engine.
    Some good stuff...
  4. GrooveThang Husqvarna
    A Class

    Husqvarna Motorcycle:
    2008 TE
    Motul 10w50, Motul 10w60 or Maxima Pro Plus 10w50. The Motul is getting pricy. A lot of guys run Rotella with success also. I used it in my KTM RFS engine for years with no issues
    2ToeRacing likes this.
  5. 2ToeRacing Husqvarna

    Husqvarna Motorcycle:
    2013 TR650 Terra
    Other Motorcycles:
    sold all my bikes in 2015
    I've used Rotella in my bikes for over 25+yrs.It's been a while so I might be wrong on the weight but I think it was 20-50?
  6. glangston Husqvarna
    Pro Class

    Location:
    Gardnerville, NV and Mammoth Lakes, CA
    Husqvarna Motorcycle:
    2012 Husqvarna TE 310
    Other Motorcycles:
    2012 BETA 350 RS
    George @ Uptite used Spectra OFF ROAD SYNTHETIC 20-50.