It's time my te630 got new wheel bearings. I've checked the manual but can't find the sizes. Anyone out there have the bearing sizes to hand please? And quantities? Yes......I could buy a pack off eBay but would prefer to go direct to a bearing supplier who are a lot cheaper. And I could hammer the bearings out and get the size.....but I don't want the bike off the road whilst I order bits....... Thanks
Go ahead and take them out. Any good auto parts store will have them. My 610 takes very common alternator bearings (two in the front, three in back). Be sure to carefully pop the seals off the new bearings and pack them with grease (and pop the seals back on) before you install them. More grease = less water.
Can anyone confirm front and rear bearing sizes ? ( i have a rad cush in the rear but thinking the bearing would be the same as stock )
Anyone looking for this info from what i have found out ( altough not tested ) Stock 610/630 Rear sizes are 25x47x12 - bearing 6005 Front sizes are 25x42x9 bearing 6028 And seemly rad husky 4t cush runs bearings 6205
