Wheels: What years fit what bikes?

Discussion in 'Common Items on Husqvarnas: Tires/tubes/grips/etc' started by dfeckel, Nov 8, 2009.

  1. dfeckel Husqvarna
    AA Class

    Location:
    Medford, NJ
    I'm shopping for spare wheels, specifically an 18" rear for my '08 CR125. What years fit what bikes? I know there is a lot of overlap, but how far back can I go? Will an 18" from an '01 TC 410 fit? (Just happened to find one for sale).
    dfeckel, Nov 8, 2009
    #1

  2. wallybean Mini-Sponsor

    Location:
    Montana
    I would almost be positive that they will have different size axles so you will have problems making it work in your swing arm.

    Walt
    wallybean, Nov 8, 2009
    #2

  3. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    the 2 stroke and 4 stroke offset is different, I tried a wr 250 wheel on my 510 and it was off about 3/8".
    rancher1, Nov 9, 2009
    #3

  4. shotgunscott Husqvarna
    AA Class

    Location:
    Twin Falls Idaho
    Husqvarna Motorcycle:
    2008 TXC 450
    Other Motorcycles:
    yamaha,suzuki,kawasaki,scorpa,AJP
    Rear axle size is the same but the offset (hub width) is different on the 00-01 wheels by aprox 3 mm
    shotgunscott, Nov 10, 2009
    #4

  5. gixxerw1 Husqvarna
    A Class

    Location:
    Uxbridge ma
    02-09 is the same axles. offest is controlled by spacers.
    gixxerw1, Nov 11, 2009
    #5

  6. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    the spacers are the same, they do not control the offset.
    rancher1, Nov 13, 2009
    #6

  7. raisrx251 Husqvarna
    AA Class

    Location:
    Virginia
    An easy way to tell is look at your 2008 CR hub where the sprocket mounts. If it is the new style you can tell that it has a spacer molded in there. I think this was done when the new frame was designed they needed a different offset. If it has a little 3mm ridge then you have the newer four stroke frame wheels. At least this is what I think.
    raisrx251, Nov 13, 2009
    #7