1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

Where are you getting your oil filter HF563 filters?

Discussion in '4 Stroke' started by bbcmat, May 4, 2009.

  1. bbcmat Husqvarna
    A Class

    Location:
    ontario
    The part number for 08 / 09 Husky four stroke oil filter changed to HF563 from HF154 (2007 and earlier).

    There were problems in the supply line - does anyone know if they are available now?

    MAT
    bbcmat, May 4, 2009
    #1

  2. rajobigguy Administrator

    Location:
    So.Cal.
    Welcome to the Cafe.
    You may check with George at Uptite In Santa Ana Ca. for the oil filters. I believe he had them on order and may have them in stock by now. There was some discussion about the new oil filters vs. the old oil fitlters so maybe a search of this forum willl net you some info.
    rajobigguy, May 4, 2009
    #2

  3. Reddog Husqvarna
    AA Class

    Location:
    Michigan
    Reddog, May 4, 2009
    #3

  4. Bernie Husqvarna
    B Class

    Location:
    Germany
    Here ist the story:

    the spring in the new filter is stronger than in the old one due to higher oil pressure of the 08 and 09 engines. So the HF563 is the right one for the latest models. The HF563 works well with the 07 and older engines though.

    I wouldn't go with the HF154 for a 08 or 09 engine.

    Cheers
    Bernie, May 4, 2009
    #4

  5. WMRRA063 Husqvarna
    B Class

    Location:
    Hungary
    If anyone knows of a company who has them, please let me know as I will be picking up my 09 SM510r on Friday.
    WMRRA063, May 4, 2009
    #5

  6. hammer Husqvarna
    AA Class

    Location:
    Washington Ont Canada
    This is the same filter as the Aprilia, should not be that hard to get hold of.
    hammer, May 5, 2009
    #6

  7. ScottyR Husqvarna
    AA Class

    Location:
    Mitchell, ON
    I talked to the guys at Motovan (HF importer) and they are looking into this for me/us.
    ScottyR, May 5, 2009
    #7

  8. Reddog Husqvarna
    AA Class

    Location:
    Michigan
    Uptite says he has the HF563.
    Reddog, May 5, 2009
    #8

  9. mtne Husqvarna
    AA Class

    Location:
    Denver
    Husqvarna Motorcycle:
    08' TE610 + 08'TE610 sumo'd
    Other Motorcycles:
    KTM 950SE
    Just so no one else reads this wrong, the new filter is for the DOHC motors. But for the 610 you can use either filter.
    mtne, May 5, 2009
    #9

  10. XLEnduroMan Heroes Ride Huskys. The others follow.

    Location:
    Durham, CA.
    Husqvarna Motorcycle:
    '18 Husqvarna 701 Enduro.
    Other Motorcycles:
    '20 Ducati Hypermotard 950.
    How I understand it, the new filters are somewhat bigger in dimensions then the 07 and older filters. The bypass valve is larger on the new filter. A stainless steel filter will pass more oil hot or cold so the bypass valve will never be used on a SS filter.

    I have read of someone running a DRZ SS filter on a TE 610. I imagine if the filter fits and seals well with an o-ring/gromit and it's cover spring then it is good to use.

    I run the Scotts SS filter in my 510 and it's dimessions match the 07 and older filters.
    XLEnduroMan, May 6, 2009
    #10

  11. PALMER84ONE Husqvarna
    AA Class

    Location:
    Silverado, CA.
    Husqvarna Motorcycle:
    08 TE450 THE ROCKET
    Other Motorcycles:
    12 RS520, CRF150F/230F, YZ250
    Bike bandit has the HF563 for 5.70 each. I also saw a whole shelf full at Up-tite today.
    PALMER84ONE, May 19, 2009
    #11