1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc Which pipe for an '06 Cr125 MXer?

Discussion in '2 Stroke' started by Parh 474, Jul 21, 2011.

  1. Parh 474 Husqvarna
    AA Class

    Location:
    Newbury Park, CA
    Husqvarna Motorcycle:
    '73 Cr125, '06 Cr125/144
    Other Motorcycles:
    Ossa, Bultaco, Puch, Maico, AJS, Yam
    For a Cr125 used almost exclusively on a motocross track, which pipe is best? I've seen FMF, ProCircuit, DEP available for about $225.

    If I punch it out to 144 later does it need a different pipe?

    Thanks,
    Craig
    Parh 474, Jul 21, 2011
    #1

  2. john01 Husqvarna
    Pro Class

    Location:
    Powhatan VA
    I have the 08 CR125/144 and have the FMF Fatty. It's actually a used 06 I got from a fellow member. It made a difference for sure in 125 trim. I have read there are better options but this one was only $40.00 so I jumped on it. I have the same pipe on it now after my 144 conversion and it still pulls great on top but the low- mid is awesome!
    john01, Jul 21, 2011
    #2

  3. Parh 474 Husqvarna
    AA Class

    Location:
    Newbury Park, CA
    Husqvarna Motorcycle:
    '73 Cr125, '06 Cr125/144
    Other Motorcycles:
    Ossa, Bultaco, Puch, Maico, AJS, Yam
    Which 144 conversion did you do? Factory or aftermarket? I understand the factory kit won't fit an '06, but don't know why.
    Parh 474, Jul 22, 2011
    #3

  4. john01 Husqvarna
    Pro Class

    Location:
    Powhatan VA
    My 144 is a Walt special with special grind on the PV's.
    john01, Jul 22, 2011
    #4