1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc white creamy substance in carby?

Discussion in '2 Stroke' started by rockdancer, Jan 20, 2013.

  1. rockdancer Husqvarna
    Pro Class

    Location:
    Sunshine Coast, Australia
    Husqvarna Motorcycle:
    2013 WR125, 2019 FE350
    Anyone had an experience with a light white creamy substance in and around the carby slide:confused:??
    This happened on a mikuni carb but wasnt evident after swapping it with the keihin

    Also wondering why the float level on a Keihin would drastically change its height/level
    I had set the height a few months ago but removed the carb and refitted it and the level changed so much so that there was fuel pouring cosntantly out of the carb when it was on the stand
    rockdancer, Jan 20, 2013
    #1

  2. jaxsplatt Husqvarna
    AA Class

    Location:
    Bundaberg, Australia
    Husqvarna Motorcycle:
    '10 WR300, 2000 TE410
    Thrush:excuseme:
    jaxsplatt, Jan 22, 2013
    #2

  3. Gotlabs Husqvarna
    AA Class

    Location:
    Branchville, SC
    Husqvarna Motorcycle:
    12 CR144 X 2!
    Condensation and premix. Ive had it on all my 2 strokes, never worried about it.
    Gotlabs, Jan 22, 2013
    #3
    utopia likes this.

  4. R_Little Husqvarna
    Pro Class

    Location:
    NJ
    yup....some kind of water.

    does it rain a lot where you are?
    R_Little, Jan 22, 2013
    #4

  5. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    Yep, fuel/oil water mix. I get it all the time here in the NW with 100% humidity and COLD. The new Lectron carb does it even worse as it atomizes the fuel more and causes condensation. Runs perfect and does not affect anything so I just let it be.
    Motosportz, Jan 22, 2013
    #5

  6. pvduke Husqvarna
    Pro Class

    Location:
    ... on the gas...
    Husqvarna Motorcycle:
    tripple-hondo hoosk...
    Other Motorcycles:
    dozens of them, kicked to the curb
    yup. spit back, air filter oil, etc all mix with the aforementioned condensation caused by the cold conditions in the carb blah blah blah...

    is fuel peeing out while on the side or center stand??? its normal in some cases to see some peeing or drops from the hoses while the gas is on and its leaned over on the side stand past a certain angle.
    pvduke, Jan 22, 2013
    #6

  7. rockdancer Husqvarna
    Pro Class

    Location:
    Sunshine Coast, Australia
    Husqvarna Motorcycle:
    2013 WR125, 2019 FE350
    It's been very hot and humid
    Thrush - yes I was waiting for a joke of some kind lol
    PV - it was so far out it wouldn't run.
    I think it must of happened when the carb was in the back of my car and got bumped around
    Pulled the carb , adjusted it and it was fine
    rockdancer, Jan 22, 2013
    #7

  8. pvduke Husqvarna
    Pro Class

    Location:
    ... on the gas...
    Husqvarna Motorcycle:
    tripple-hondo hoosk...
    Other Motorcycles:
    dozens of them, kicked to the curb
    yikes!
    white stuff and a dribbling carb?
    time for some antibiotics!
    that or the float-bowl fairys were messin' with that fuel level. little turds. they fry up real nice with a lil butter. oooo yeh they do.
    pvduke, Jan 22, 2013
    #8
    ohmygewd and rockdancer like this.

  9. rockdancer Husqvarna
    Pro Class

    Location:
    Sunshine Coast, Australia
    Husqvarna Motorcycle:
    2013 WR125, 2019 FE350
    It's been very clammy - dia.
    Serves me right for carb swapping
    rockdancer, Jan 22, 2013
    #9
    ohmygewd and pvduke like this.

  10. pvduke Husqvarna
    Pro Class

    Location:
    ... on the gas...
    Husqvarna Motorcycle:
    tripple-hondo hoosk...
    Other Motorcycles:
    dozens of them, kicked to the curb
    carb swapping! hahahahaha...waitl yer manifold finds out!!! youll be sleepin in the toolbox mate!
    pvduke, Jan 22, 2013
    #10
    ohmygewd likes this.