All 2st Will Pelican Front fender fit '06 125?

Will the new front fender bolt onto an 06 125 with 45mmm Zokes? $20 at Rocky Mtn ATV/MC
Would I need the new front number plate to go with it?

Craig

Give it a try, worst you could lose is $20 and some time. I'd bet at a minimum you'd have to re drill the mounting holes and use larger washers. Probably have to grind the vertical mounting posts off also.

I put a late model RMZ fender on my '14 CR and had to do the same as well as fab up a mounting bracket.

Well worth it though for the satisfaction of doing something different than the crowd. If you decide to do it put up a "How To" thread so all of us can enjoy it.

I'd guess from your list of old, exotic dirt bikes this little project would be easy for you.

I went full wacky and got a Tc449 fender and number plate. Bolted right on - no issues. $29 at Dennis Kirk for the last one.

Just hope the trough in the fender and number plate doesn't channel roost right in my face.

Last old exotic project.

Goes pretty good.

Awesome Puch! Those things are fast.

Well, the twin-carb 250 was...

What did you decide on the front fender for your '06 CR?

Back in the day ('71-'82) I moto'd Bultaco, Maico, Husky, Sachs, CZ and Yamaha. Always wanted a Puch 125, but they were rare. Very nice restoration on #474

Thanks. I put the Tc449 fender and number plate on it. Looks cool, like Dr Who's bowtie.

Also put 2010 Wr250 tank panels on. At $90 a pair they're cheaper than stock + stickers, and should look better longer. The red is a little darker, but it's the only red on the bike besides stickers.

The only problem with that fender is the 12 lbs. of mud it catches in the valley on top. Looks cool though.

I can picture that. Have to silicone spray it. Or that cool hydrophobic stuff. Southern California doesn't get too much mud anyway.