Wiring harness question

Discussion in 'TR650' started by IPA Brewer, Oct 15, 2013.

  1. IPA Brewer Husqvarna
    AA Class

    Location:
    Placitas, NM
    Husqvarna Motorcycle:
    2015 FE501
    Other Motorcycles:
    Ducati Multistrada, KTM 690E
    Hi,

    I'm finally getting around to replacing the rear fender after it getting munched by the back tire. I am also tapping into the blinker and brake lights to feed signals to the top case. While rooting around in the rear section I came across an electrical plug with a cap on it. I can't find reference to it in the service manual or the electrical schematic (I did find an accessory plug in the schematic but not as many conductors as in the harness).

    Anyone come across this yet?

    Thanks

    Rich in Placitas
  2. johnsweet Husqvarna
    AA Class

    Location:
    Mount Desert, Maine 04660 USA
    Husqvarna Motorcycle:
    TR650
    Other Motorcycles:
    KTM 790R RickmanZ BulsSherpaTs350
    Yes I have the same plug zip tied to the rear rack, just assumed it was for heated riding jacket/pants/suit, someone should know what it's for
  3. chris1261 Husqvarna
    AA Class

    Location:
    North Jersey
    Husqvarna Motorcycle:
    2013 TR 650 Strada
    I think it was for the optional alarm system
  4. hasenpfeffer Husqvarna
    Pro Class

    Location:
    CO
    Husqvarna Motorcycle:
    TR650 Strada
    It is where the factory alarm accessory plugs in.
    johnsweet likes this.