Hi group. I got locked out of my account so here as gasaxe now. Deal is I bought a 06 SM 610 motor off a friend. 1500km. Import from italy. My old 99 motor was roached. 40k on the clock. Chain stretched to the max gaskets toast bearing all worn out. Bought all the parts for $600 and they sent me the wrong model motor so stuffed it in a corner. I'm now trying to wire up the charging, regular, cdi and coil. 3 yellows putting out 6 volts dc coming from the motor with green and a red. The 06 green and red are reading as negitive. My 99 had3 yellow & 4 wires green red white black. These red green need to connect to white black red green. Anyone know the proper order? From what I see these go to my CDI then out and guessing one controls the coil and spark. I totally suck at wiring if you haven't figured that out I will upload a picture of the pasta I have going on. I really appreciate any input and help. So close to firing it up. Just need some spark to the plug and I can start tearing up the mountain roads again.
