250-500cc Workshop manual 1996 wr360

If anyone know where i can get a workshop manual for a WR360 1996 model

G'day Well360,

How did you go? I notice this post was almost a year ago. I've just bought a 1996 WR250 and i'm looking for a workshop manual. I've not been able to find anything. If you've been able to get anything i'd love to know.

I have been told for the 250 the engine is the same from 92-98 and that a manual for any of these years would be the same for engine work. I think the forks have been changed around each year and maybe the rear suspension too.

What country are you in? I'm in Australia.

Best of Luck.

You can use the 2k Wr250/360 manuals as they are pretty similiar, then use the parts/service manual for your year model.

Thanks for that. I'll see how i go.

You probably won't get a workshop manual unless you ring R&D Husky or Jaydee's maybe first class in lillydale...if your a Queenslander, there's a few blokes here from up north.
From Husqvarna Australia:
http://www.husqvarnamotorcycles.com.au/support.asp?id=2&t=Owner's Manuals&cid=3

From OS:
https://www.halls-cycles.com/Catalog/Halls-Cycles-Husqvarna.aspx <- great parts and sends to Oz plus very helpful!!

thanks again. I'm in the Blue Mountains. Only a few Km's from R&D. I've checked with Stefan there, but they don't have any. He reckons i'll have to find someone who has a hard copy tucked away in the top shelf of a set of she draws somewhere. I'll try those QLD places you mentioned.

Thanks again.