1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc WR 125 2010 Lights issue

Discussion in '2 Stroke' started by flashguru, Jan 7, 2013.

  1. flashguru Husqvarna

    Husqvarna Motorcycle:
    WR 125 2010
    Hi Guy's,

    Got an issue with the lights on my WR 125 2010. They were working, i went out green laning, then on the ride home they started flickering and went off. Now they wont come back on.

    Now when the bike starts up and the lights are off, the speedo and mileage show on the display, when i switch the lights on to half beam or full beam, the display goes off.

    I can't see anything obvious, everything seems to be earthed properly still. Its weird, because the power must be working or the display wouldn't come on.

    Any tips on how to diagnose the issue? or pointers on what to look out for

    Thanks in advance.
    flashguru, Jan 7, 2013
    #1

  2. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    I had a problem where my display quit working, along with the tail light when my headlight bulb burned out. When I switched to high beam, everything was okay though, because high beam wasn't burned out.
    Dirtdame, Jan 7, 2013
    #2