125-200cc Wr 125 oil ratio for road

Hi guys,
Right my friend is telling me to drop my oil mix from 32:1 to 40:1, but I ride my bike on the road as it’s a supermoto, would the 40:1 be okay on the road, I do hold it open on the a roads regularly so I have no idea
Any advice is appreciated!

If the bike is running well with 32:1 there's no reason to change the ratio.

It runs well yeah, it’s just there’s a fair bit of smoke and the spooge it crazy

If you're running WOT a lot & it's still spooging then ya jetting's too rich. I run 32:1 in both my 165 & 300 & get no spooge on 300(dry black silencer/very little smoke while riding) & 165 gets very little(slightly wetter depending on riding style & slightly more smoke)

What he said and worn top end/poor combustion will cause more spooge. Also old packing in the silencer. Check your compression so you're not wasting time rejetting a worn out top end

Okay cheers guys, top end is mint just had it re plated and new piston, I know down low it’s rich so that’s where all the sponge could be building up because at WOT the jetting it spot on

What rims are you running on your WR?

I run 50:1 for road with very little load while cruising

It’s a supermoto bud