1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc wr 125 radiador damage

Discussion in '2 Stroke' started by zanol, May 20, 2009.

  1. zanol Husqvarna
    B Class

    Location:
    portugal
    what do you think about that?
    [IMG]

    it`s possible to repair or don´t have problem to race like that?
    zanol, May 20, 2009
    #1

  2. Norman Foley Husqvarna
    Pro Class

    Location:
    Trumansburg, NY... The Beautiful, Finger Lakes
    Husqvarna Motorcycle:
    82 250WR 86 250WR 93 WXE350 03 TE610
    Other Motorcycles:
    '85 Fantic 300 '12 HUSABERG TE250
    If there are no leaks run it!:thumbsup:
    Norman Foley, May 20, 2009
    #2

  3. jmetteer Husqvarna
    Pro Class

    Location:
    Woodland, WA
    Husqvarna Motorcycle:
    TXC300 CR125 CR144
    Other Motorcycles:
    WR250F, TRANSALP
    I think if it doesn't leak or over heat I would run it.

    If you want it fixed Mylers is supposed to be the best.

    Later,
    jmetteer, May 20, 2009
    #3

  4. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    I got a squooshed one about like that, on one of my bikes and it has been that way since 2002 with no ill effects.
    Dirtdame, May 20, 2009
    #4

  5. razornpc Husqvarna
    AA Class

    Location:
    iowa
    i have radiator guards, mine are made by rooster, im sure moose makes some too.

    i wouldnt worry to much about that though, run it
    razornpc, May 21, 2009
    #5

  6. jmetteer Husqvarna
    Pro Class

    Location:
    Woodland, WA
    Husqvarna Motorcycle:
    TXC300 CR125 CR144
    Other Motorcycles:
    WR250F, TRANSALP
    Rooster is now done by Motosportz a sponsor of this site. :thumbsup:

    Later,
    jmetteer, May 21, 2009
    #6

  7. gem Husqvarna
    A Class

    Location:
    British Columbia
    I agree.

    I have had rads damaged worse and run them with out issue. Don't try to mess with it if it is working. I've seen many a man try to straighten it just 'a little' and end up springing a leak.
    gem, May 21, 2009
    #7