125-200cc Wr 125 stator/wiring help!! Please

Hey guys, I purchased a 2007 Wr 125 about a year ago and it was setup like a cr Steffan merriman replica, i'm now trying to get it roadworthy. In the process I put them loom back in and tried to work out what went where with all the cut cables. I someone hooked the voltage reg up wrong and when I started it the speedo and everything worked. But then I revved the bike and the speedo went up in smoke!! I've now changed the wiring and think it is right. Only problem is I have no power from the stator other then the power to the coil .. Does this mean I have fried the other side of the stator? And does anyone know how to test it?

Cheers,
Justin

you cant test it till it spins sorry,im doing the same,the rectifier is fried,get a new one from ebay single phase 1 red(live) 1 black (ground) 2 yellow (the rectifying bit) im sure you know wat the rectifier does if not it puts out a nice clean 12v current at any throttle range, if theres power to the coil it should be good