1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

250-500cc WR 250 Chain Guide Wear

Discussion in '2 Stroke' started by twobanger, Sep 14, 2010.

  1. twobanger Husqvarna
    A Class

    Location:
    Sydney Australia
    Hello,
    Which chain guide is best to run with a 52T rear sprocket?
    Already destroyed the MX style one due to the angle from the large sprocket,would have be ok with a smaller sprocket.

    And the standard roller is constantly not rolling and easily bends out of shape,i noticed youve got different ones in the US what's your thoughts on them with a 52T clearance wise?

    Thanx
  2. roostafish Husqvarna
    A Class

    Location:
    Eugene, OR U.S.A.
    Husqvarna Motorcycle:
    2009 WR 250
    Other Motorcycles:
    2013 KTM 350 XCF
    I think the best chain guide of all time is one from a stock Honda XR 250, 1996-2004. It can be adapted. LTR used to make a mount for it for Gas Gas, which has the same mount and chain guide as the Husky. TM Designworks makes nice stuff, but it's not as small, or as flexible as the Honda unit. It's BEEFY though. I have one on my bike currently. I didn't use threadlock on it when I installed it, so the bolts came out, it dragged me to a halt, and the chain guide shows no damage. Pretty tough stuff.