250-500cc wr 360 2002 lights? are S###

right im in the lighting upgrade department i took the B###h as i call her out tonight for some woods trial riding an i have a massive hole fight in the field of vision, hi-beam an lo work but right ahead is a black space where there should be light...

torches or better bulb upgrade to hid perhaps?

need advice

thank you

LEDs draw very little seem to put out a bunch of light. I bought two solstice cubes that look indestructible a d put them on my sons 90 cc four wheeler and they light up plenty and the small stator lights them. The have a lot of options. I was gonna see if I could put them on my wr360 but at the moment I don't know how to hook them to the bike.

what volts do they operate at? may be a ase of soldering them to the light wires, would have to do away with lo beam tho or high...
i was looking at these as a possible seperate battery shouldnt be too hard to hook up an cheap!

Leds are going to want 12v DC.


Those cheap ebay ones are grossly overrated just fyi.

http://www.visionxusa.com/-Solstice_Solo/c_239/index.html?osCsid=875f20799ce022983a16a093ede4ca88. These are variable voltage weigh about .4 lbs are submersible impact resistant. They are kinds spend but they have been very reliable. You might find a vendor for them over their. I think this is who I bought them from. http://visionxsuperstore.com/SolsticeSoloS1100Series2InterlockingLEDLight.aspx

yeh i doubt they kick out 1600 lumens probably more like 400 but i night ride a bicycle with a p7 led lenser torch on bars and its good for low paced but raise the speed to 30+ mph an your guessing a little .
i was thinking of trail tech head light as its a straight swap...