1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

All 2st WR footpeg compatiblity question.

Discussion in '2 Stroke' started by PowerKord, Oct 26, 2011.

  1. PowerKord Husqvarna
    AA Class

    Location:
    Notheast Ohio
    Husqvarna Motorcycle:
    2008 WR 250 Sold
    Other Motorcycles:
    2014 Sherco SE-R 250
    I was looking at the Scar-racing footpegs for the Husky and I see the same part number also fits Yamaha's. Does anybody know if stock or aftermarket footpegs for Yamaha's will fit WR's also?
    PowerKord, Oct 26, 2011
    #1

  2. PowerKord Husqvarna
    AA Class

    Location:
    Notheast Ohio
    Husqvarna Motorcycle:
    2008 WR 250 Sold
    Other Motorcycles:
    2014 Sherco SE-R 250
    I spelled compatibility wrong, it was late...
    PowerKord, Oct 27, 2011
    #2

  3. 080 Guest

    Funny thing you mention this. I was just taking the wide IMS pegs off my yz450 and noticed they looked exactly like the husky ones. Took the husky one off and yes they fit. One thing though, they were really tight going on the husky but after a rubber mallot no problem.
    080, Oct 27, 2011
    #3

  4. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    The huskys are just slightly smaller than the typical footpeg, Grind a little off the bottom of the tube and mount them up.
    Motosportz, Oct 27, 2011
    #4
    MR54L likes this.