1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

WR Front Fenders

Discussion in 'Vintage/Left Kickers' started by luvwoods, Feb 8, 2010.

  1. luvwoods Husqvarna
    AA Class

    Location:
    Zoar, Ohio
    Here's one for the die-hard WR folks: what is the correct type of front fender for a '84 WR? Is it the type with vent slots in its rearward surface or the type without the slots?

    I can't tell from my parts list, nor from the few photos I have. Seems every photo is from an angle which doesn't show it.

    Currently my front has the slots, which I think is nuts for an enduro bike. I'm tired of removing all the slop my front tire throws up through the slots and under my tank - and into my electricals.
  2. frog Husqvarna
    AA Class

    Location:
    MN
    Check with DC plastic,not the shinny stuff-but tuff.
  3. ruwfo Administrator

    Location:
    NJ
    Husqvarna Motorcycle:
    1980 390CR, 1982 430CR, 1984 400WR
    Other Motorcycles:
    1985 250XC, 2016 FJ-09
    looks like no vents

    Looks to me like the 84 WR's had NO vents :D



    Husky John

    Attached Files:

  4. luvwoods Husqvarna
    AA Class

    Location:
    Zoar, Ohio