1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc Wr125 2014 suspension/anything to look out for?

Discussion in '2 Stroke' started by scott-tmk, Sep 22, 2014.

  1. scott-tmk Husqvarna
    AA Class

    Location:
    uk
    Husqvarna Motorcycle:
    Husqvarna wr125
    Just recently purchased a wr125 and was wondering just how to stiffen up the rear shock not much but just a tad as im 6ft3 and weigh 12 and a half stone,other than this im overly impressed by the bikes performance in the hills and climbing and the technical stuff..any input would be great..
    scott-tmk, Sep 22, 2014
    #1

  2. DTX915 Husqvarna
    Pro Class

    Husqvarna Motorcycle:
    wr125
    Other Motorcycles:
    kdx200 tt500 yz450 klx125
    The wr
    that used to start on the same row I did had its shock fall apart internally. Mine had some aluminum shavings inside that kept the shims open,once removed it was just fine. Other than that just set your sag.
    DTX915, Sep 24, 2014
    #2

  3. kan3 Husqvarna
    A Class

    Husqvarna Motorcycle:
    none
    Other Motorcycles:
    2013 cr144
    See if you can get 100-105mm sag and 30-35mm free sag. If not you may need a different spring
    kan3, Sep 24, 2014
    #3
    lankydoug likes this.

  4. scott-tmk Husqvarna
    AA Class

    Location:
    uk
    Husqvarna Motorcycle:
    Husqvarna wr125
    I think i will give that a try,thanks for the input guys :thumbsup:
    scott-tmk, Sep 24, 2014
    #4