1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc WR125 just died?

Discussion in '2 Stroke' started by shawbagga, Jun 4, 2018.

  1. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    Riding today & it just stopped like the killswitch had been hit! Didn't think it was plug but tried another regardless-no go. Cut killswitch wire & tried open & closed-nothing. Doesn't even want to start. Got mate to tow me back to ute. Thoughts?
    I'm hoping the ignition hasn't shit itself & it's just a dodgy wire/bad earth! :) I'll check for spark this week sometime after I wash it.

    Bike has 200 hours on it so I'm suspecting the ignition TBH. At least got 60km of great trails in first & was an easy 15km tow
    shawbagga, Jun 4, 2018
    #1

  2. johnnyboy Husqvarna
    Pro Class

    Location:
    UK
    Husqvarna Motorcycle:
    WR 125
    Other Motorcycles:
    TM 250f
    Coil mount under the tank may of snapped , Same thing happened to me and that was the problem.
    johnnyboy, Jun 4, 2018
    #2
    shawbagga likes this.

  3. slo rider Husqvarna
    AA Class

    Location:
    WA
    Husqvarna Motorcycle:
    2009 WB165
    Other Motorcycles:
    2007 YZ250
    Do a compression test to rule out a collapsed piston ring.
    slo rider, Jun 4, 2018
    #3
    shawbagga likes this.