1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

125-200cc WR125 to Honda CR125 clutch interchangability

Discussion in '2 Stroke' started by bandkw, Jun 20, 2011.

  1. bandkw Husqvarna
    A Class

    Location:
    Minnesota
    I ruined my clutch in a mud race and need to put in a new in before next weeks enduro. I was told by my dealer that either the Honda CR125 or CR250 clutch plates are an exact replacement and that they cost about half of what the guinuine Husky parts do so I should get them. Does anyone know which bike / year(s) are the right replacement parts for a 2009 WR125?
  2. racer726 Husqvarna
    AA Class

    Location:
    Unionville, MI
    1985-2007 Honda CR 125 friction discs are all the same. It just depends on how many you need. That was the difference between the years.
    bandkw likes this.
  3. bandkw Husqvarna
    A Class

    Location:
    Minnesota
    Thanks for the help, I knew someone here would have the answer!!!
  4. Joe Chod Husqvarna
    Pro Class

    Location:
    upstate NY
    early honda 6 and 7 steel/fiber later honda CR 7/8. Husky 6/7
    Ferracii always has clutch packs cheap on fleabay
  5. surfer1100 Husqvarna
    AA Class

    Location:
    Ottawa, CAN
    Husqvarna Motorcycle:
    09 WR250, Memories of past tiddlers.
    Other Motorcycles:
    TM-01 EN 125, 03 125 MX, 09 EN 155
    FYI Full husky OEM clutch pack....steel and fibers is only like 90 bucks.
  6. Norman Foley Husqvarna
    Pro Class

    Location:
    Trumansburg, NY... The Beautiful, Finger Lakes
    Husqvarna Motorcycle:
    82 250WR 86 250WR 93 WXE350 03 TE610
    Other Motorcycles:
    '85 Fantic 300 '12 HUSABERG TE250
    Best advice.....
  7. Bill502 Husqvarna
    AA Class

    Location:
    Upstate NY
    Husqvarna Motorcycle:
    2007 WR167 1978 CR250 1938 sw maus
    Other Motorcycles:
    1970 Triumph T100C 1973 Honda TL125