250-500cc Wr250 - 300 Pics. Show me your Bikes

Just bought one and need some ideas ..
please post up Pictures. Undecided in regards of front fender, Yamaha style or 511 449 style.

Thanks Guys,

http://www.cafehusky.com/threads/please-post-pictures-of-your-2-stroke-bikes.1157/

dont want to go through 109 pages mostly talk about bikes... started it and got bored

2014 300

Here's mine!

Was out with it today... Rear brake pedal seems a bit odd compared to the 511 one.

I agree the rear brake pedal does seem awkward, and hard to find at times. It took me awhile to get used to. Here's my 2014 wr300.

And the shifter too, I got one with a Hammerhead tip from Bill's and a Hammerhead-like brake tip from somewhere. Much better



Mine has very low hours and stock trim. Mod's so far are: Rekluse EXP 2.0, have a Terminator cable and MSR EZ lever to install; EE hand guards, rad guards and bar risers, need the skid plate next; Kenda Parker on the rear, but have a Metzeler MC5 and a Tublis to install; shifter and brake pedal done; added Honda CR manifold gaskets; Lectron, cable and G2 throttle ordered and have a used FMF Fatty and new Q4 tip too.
Once I get the carb on and sorted planning to do the forks and ergo's, so new .46 springs and oil and check alignment, probably risers/bars/clamp changes too.
I like the clean, stock look. Not into a bunch of stickers. I will probably do some Italian/Ferraci style backgrounds and numbers at some point soon.

good luck with yours and enjoy

Very nice! Well done, looks great.

Husky Jim your bike looks awesome. Is that a graphics kit or new plastics? Very well done.

New upper shrouds, side panels, rear fender and Decal works semi-custom graphics.

Husky Jim - Where did you get the white tank shrouds?

husky jim, the "enduro" on the swinger is a nice swede nod

gently bend the brake pedal straight(obviously take off bike first!). I did this as one of the first mods when got my bike. vice, bit of heat & soft mallet did the job. just be gentle

which frame guards are these???

Cemoto Plastics Italy

http://www.cemoto.it/prodotti.php?act=1&id=11&lingua=uk

Meca Systems

http://www.rapid-moto.com/off-road/...s/frame-guards/husqvarna-wr-frame-guards.html

Sure is! I wasn't really copying the Austrian Made Husky's but the Swedish ones!
These are my 430s

And the Auto!

im sure youll get "hey you made your bike look like the new ones"
nice stable of bikes