1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc wr250 HTS question

Discussion in '2 Stroke' started by kiethy, Oct 4, 2010.

  1. kiethy Husqvarna
    B Class

    Location:
    Australia
    2001 wr250
    While out riding the selector spring snapped leaving the gear lever floppy. To get at it both clutch covers have to come off and the HTS needs disconnecting. Fortunately I discovered the main bolt into the left side valve loose however.

    1. How do I reinstall/time the gear since it was loose I couldn't mark the spot and really don't have a clue how it should be aligned?

    2. Is it ok to use loctite on the bolt?

    I have the owners and workshop manual but it is not clear. :excuseme::excuseme:
    kiethy, Oct 4, 2010
    #1

  2. kiethy Husqvarna
    B Class

    Location:
    Australia
    Sorted, quick cleanup revealed alignment dots:applause:
    kiethy, Oct 5, 2010
    #2