250-500cc WR300 KICKSARTER?

My kickstarter decided it liked florida better than ny, and exited my bike during the first gncc. I stalled the bike looked down and no more kickstarter....ugh.

Anyways I called halls and they have one in stock for 103.00........YIKES....

Anyone know of any alternative?

Wow! I'm gonna lock tite my bolt tonight when I get home!

Bump starting is your only option.

When my brother had his 98 cr250 (basically all honda two strokes)I lined it up and it sure seemed like it would work. I never actually tried it though. Sure bet it would though

can you say REKLUSE

A few on eBay but don't know what other years will work.

I know they fit the wr and wxe/c models from 94 to 2004 as long it has a fine spline the fitment is pretty wide spread

I use the same on my '92 360 and '12 250/300. I looked on ebay earlier for you, but using the 360 only presents a $100 used option. Probably gonna have to just bite the bullet on it.


And what are you doing stalling it with a rekluse?

man $103 is cheap. try $300+ here in AUS!

Do you not have breakers yards for bikes there? Would
Be my first port of call.
Classifieds here asking for one,
Go sneaky round a dealers with the right sized
Spanner and cause a distraction.

That sucks tho good luck on the replacment

that's very dishonest pips but I like your train of thought

not that dishonest if it fell off your bike whats to say it wont fall off a dealers? lol

just double check all bolts, makes me want to drill a hole in the shaft and put lock wire on it.

locktite is what my dealer recommended and 103 is a good price 130 is the real price the last time I looked

I have a sloppy one I'll sell ya

^ you still talking bout kickstarters Haynesy?

yes..lol

just checking mate thought I might've typed in the wrong website name again. my bad. back to talking about loose, flogged out shafts I guess. resume thread..........now

I measured the spline on my kicker to see if I could find another brand with a taller one. Its 17mm point to point on splines. Anyone know the big 4 well enough to state the size???

mind you the big 4 (if they fit) don't have the bend that the husky has. needs to clear pipe. seems hard without bend.

Here is one.
http://www.ebay.com/itm/New-Husqvar...Parts_Accessories&hash=item3a8f0c3766&vxp=mtr