1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc WR300 kickstart seal

Discussion in '2 Stroke' started by shawbagga, Aug 15, 2017.

  1. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    Looks like it's leaking ever so slightly. Is it just a case of removing kicker, picking seal out & pushing new one in?
    shawbagga, Aug 15, 2017
    #1

  2. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    Anybody replaced it before? Not a case splitting job is it?
    shawbagga, Aug 17, 2017
    #2

  3. bob051 Husqvarna
    AA Class

    Husqvarna Motorcycle:
    WR 250
    Check gearbox breather hose and make sure it's not blocked. If it is blocked, unblock it and the seal may stop leaking.
    bob051, Aug 18, 2017
    #3

  4. NCSteve Husqvarna
    Pro Class

    Location:
    Appalachia
    Husqvarna Motorcycle:
    12 WR300 13 WR165
    Other Motorcycles:
    02 XR250R 00 XR100R
    Sorry mate, haven't had to do it. Had a look at the manual, but couldn't find any help.
    NCSteve, Aug 20, 2017
    #4

  5. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    It's not leaking much but just noticeable.

    Surely it can be removed in situ?! I might take kicker off & try clean under it first before I try picking it out!
    shawbagga, Aug 20, 2017
    #5