250-500cc WR300 wheels/hubs

hey guys, first time posting here, long time lurker since I bought my 11 WR300 last year. Turns out I grabbed it off a fellow member who bomb proofed her well.

In any case, I'm looking to buy a set of wheels for her. Long story short the rear hub is destroyed. Started looking for that which will run about $280 for the hub only. Got to thinking and the rims are pretty dented/nicked so I might as well look for another set and use the old ones as spares.

I did a LOT of searching and didn't come to any conclusive evidence. It looks like the warp9's may fit but require custom spacers? Any help/info/links would be greatly appreciated. I just tore her down to the frame so she starts getting powder coated next week!

I've got a set of warp 9 wheels on my 07wr and am very happy with them. I am using the stock spacers with mine just make sure they send you the "2 stroke" wheels with the correct offset.

The sprocket offset is 5mm more narrow on the 2 stroke wheels than the 4 stroke wheels. Warp9 does make specific 2 stroke husky wheels. The fronts are all the same.

Thanks guys!

WVdag - do you ride primarily off road? How have they held up?

I ride mostly heavily wooded single track and hare scrambles. Worried about dents.

Y

Yes the first set they sent, rear anyway, I'm sure was for a 4 stroke. I sent it back and they sent the correct 2 stroke specific rear and all is well. Very nice wheel set IMO.

Thanks, just placed an order with them, Black wheel, Red hub, silver spokes. Good guys over there. Once I get the wheels I'll take them with the triple clamps and clutch/stator covers to get them anodized the same color. Then everything goes out for powdercoat.

We need to see a photo of this when you've finished it.