1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc wr360 part out on DBW

Discussion in '2 Stroke' started by shawbagga, Jul 17, 2015.

  1. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    think its a 200 wr360 being parted out on dirt bike world. bottom end/6 speed, hydro clutch, forks, wheel, brakes etc. just a heads up for anyone chasing parts
    shawbagga, Jul 17, 2015
    #1

  2. pablopaints Husqvarna
    B Class

    Location:
    Melbourne australia
    Husqvarna Motorcycle:
    1991 wxe ? Sort of.
    Other Motorcycles:
    ducati monster suzuki RM 250
    Wonder if it's worth me chasing a hydro clutch but would be nice.
    pablopaints, Jul 17, 2015
    #2
    shawbagga and 2premo like this.

  3. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC

    i was wondering the same
    not going after this just wondering if it's smoother
    2premo, Jul 17, 2015
    #3

  4. justintendo klotz super techniplate junkie

    Location:
    mercer, pa/northwest pa
    Husqvarna Motorcycle:
    84 250,86 400,87 430,88 250,95 360
    Other Motorcycles:
    99 kawasaki zrx 1100
    wondering if my bike is weird but my 360 has a super smooth clutch, real easy to pull. especially compared to my swedes. why do you guys desire hydro clutches? its not like the 360 wants alot of clutch work. i do have it adjusted right with a motion pro terminator
    justintendo, Jul 17, 2015
    #4

  5. pablopaints Husqvarna
    B Class

    Location:
    Melbourne australia
    Husqvarna Motorcycle:
    1991 wxe ? Sort of.
    Other Motorcycles:
    ducati monster suzuki RM 250
    Guess I just always preferred hydro clutches plus the fact I got a few spares from my Ducati.
    pablopaints, Jul 17, 2015
    #5
    shawbagga likes this.

  6. juicypips Husqvarna
    Pro Class

    Location:
    gloucestershire
    Husqvarna Motorcycle:
    wr 360. 2002
    Other Motorcycles:
    Gas Gas TxT 300, Yamaha wr250f
    Get a hebo http://www.john-stichnoth.com/Hebo.html one they end in a cable rather than a stainless wire, being said my new msr perch extended actuator arm and teflon venhill cable seem very smooth.
    juicypips, Jul 17, 2015
    #6

  7. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    hydro the go, 300 clutch pull pretty heavy. pivot assist lever helped but still too heavy. maybe teflon or MP cable makes up the rest but hydro consistent & nice! if i could afford it id grab the bottom end for the 6 speed & the wheel for spares!
    shawbagga, Jul 18, 2015
    #7
    ohmygewd likes this.

  8. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    hebo looks a little untidy IMHO juicy. doesnt magura make one for 360?
    shawbagga, Jul 18, 2015
    #8

  9. juicypips Husqvarna
    Pro Class

    Location:
    gloucestershire
    Husqvarna Motorcycle:
    wr 360. 2002
    Other Motorcycles:
    Gas Gas TxT 300, Yamaha wr250f
    Nope cant get it in there as the coolent hose sticks up in the way :(
    juicypips, Jul 18, 2015
    #9

  10. justintendo klotz super techniplate junkie

    Location:
    mercer, pa/northwest pa
    Husqvarna Motorcycle:
    84 250,86 400,87 430,88 250,95 360
    Other Motorcycles:
    99 kawasaki zrx 1100
    that coolant hose fitting is a real bastard...even for a regular cable
    justintendo, Jul 18, 2015
    #10

  11. juicypips Husqvarna
    Pro Class

    Location:
    gloucestershire
    Husqvarna Motorcycle:
    wr 360. 2002
    Other Motorcycles:
    Gas Gas TxT 300, Yamaha wr250f
    Yup its a tight right angle its a pain in the arse.
    Am looking at getting cases machined and stuffing ktm sx 125 clutch on it.
    juicypips, Jul 18, 2015
    #11
    pablopaints likes this.

  12. Darrel78 Husqvarna
    AA Class

    Location:
    Central Arkansas
    Husqvarna Motorcycle:
    87 WR430
    Jusintendo, my 360 also has a super smooth clutch pull, two fingers after lubing ( that sounds rather nasty!). Not as slick as the hydro clutch on my orange 380 but very close. So far as I know I'm running stock levers / cables. Seems the eye-talians could have done a bit better on the layout for the cable / water pipe arrangement.
    Darrel78, Jul 23, 2015
    #12

  13. Darrel78 Husqvarna
    AA Class

    Location:
    Central Arkansas
    Husqvarna Motorcycle:
    87 WR430
    Reading the Hebo article on the KX, looks like the clutch arm to cable mounting point could be shortened a bit to ease the cable mid-alignment? Do these hydro kits have force to spare? Always the trade off of size / force available to force required for effortless clutch pull.
    Darrel78, Jul 23, 2015
    #13

  14. juicypips Husqvarna
    Pro Class

    Location:
    gloucestershire
    Husqvarna Motorcycle:
    wr 360. 2002
    Other Motorcycles:
    Gas Gas TxT 300, Yamaha wr250f
    Too much power who knows, i cant even find one for sale looks discontinued.
    juicypips, Jul 23, 2015
    #14