1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc Wr360 static timing & powervalve

Discussion in '2 Stroke' started by AUSKY, Dec 25, 2010.

  1. AUSKY Husqvarna
    AA Class

    Location:
    Cairns, FNQ,Australia
    Husqvarna Motorcycle:
    08 TE510 96 WR125 00 WR360 13 WR165
    Other Motorcycles:
    1999 XR250 83 YZ 490
    I have a 2000 WR360 but I don't have a workshop manual & I was hoping someone could help me set up the static (ignition) timing.
    I can see the mark on the crankcase & the mark on the stator, are these two supposed to line up?
    Or how many mm or degree's do I need to rotate the stator for the correct spark advance?

    Also does any one have any info on setting up the powervalve?:excuseme: Or a workshop manual they would like to share?
    AUSKY, Dec 25, 2010
    #1

  2. ohmygewd Husqvarna
    Pro Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    13'Berg FE350, 96'WR360, 01 WR250
    Other Motorcycles:
    Aprilia RSV1000
    PM me ya email address and i'll send owners/workshop manual

    Jay
    ohmygewd, Dec 28, 2010
    #2