1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc WRE125 running issue / cutting out at high revs

Discussion in '2 Stroke' started by DirtyDan, May 9, 2011.

  1. DirtyDan Husqvarna
    B Class

    Hi Folks

    I have 08 WRE125, under 1k km's have fault when running the bike seems to be missing/cutting out
    while driving, its mostly when going into steep sections where the bike is under pressure it just cuts out & the digits on the clocks go to 8's then goes blank before coming on again, the bike starts fine after it, its getting dangerous so really need it fixed, i thought it might be the battery but i replaced it and its still the same, once the oil light flashed & its showed ecu1 which i believe is oil pump but i think this is down to what ever fault?
    DirtyDan, May 9, 2011
    #1

  2. Joe Chod Husqvarna
    Pro Class

    Location:
    upstate NY
    ensure you have a resistor spark plug in it
    Joe Chod, May 9, 2011
    #2

  3. DirtyDan Husqvarna
    B Class

    Thanks for the reply, the bike has a NGK BR9EIX Plug in it, there was a BR10EIX plug in it but I changed it to the BR9EIX as this was what was in the manual. is there different types of each spark plug model?
    DirtyDan, May 10, 2011
    #3