1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc WTB: used crank for 08 wr 250 - where to buy?

Discussion in '2 Stroke' started by fire1998, Mar 12, 2009.

  1. fire1998 Husqvarna
    AA Class

    Location:
    Cheyenne, WY
    I am looking for a used crank that is still useable for an 08 WR 250. I think cranks from 99 and up will work.
    Thanks
    fire1998, Mar 12, 2009
    #1

  2. surfer1100 Husqvarna
    AA Class

    Location:
    Ottawa, CAN
    Husqvarna Motorcycle:
    09 WR250, Memories of past tiddlers.
    Other Motorcycles:
    TM-01 EN 125, 03 125 MX, 09 EN 155
    surfer1100, Mar 12, 2009
    #2

  3. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    That Bills Motorcycles Plus in Salem Oregon. Call him direct. Great guy / dealer so no worries.
    Motosportz, Mar 12, 2009
    #3

  4. PC. Husqvarna
    AA Class

    Location:
    Beaverton, OR
    Husqvarna Motorcycle:
    CR165 & CR144
    Other Motorcycles:
    KTM500
    I'll second that. I bought my 300 from him last week.
    Super straight shooter :thumbsup:

    He will talk your ear off given the chance. FYI....



    Curious. How come you dont have your stock crank rebuilt. I get them rebuilt for $35 + parts.
    PC., Mar 12, 2009
    #4

  5. jmetteer Husqvarna
    Pro Class

    Location:
    Woodland, WA
    Husqvarna Motorcycle:
    TXC300 CR125 CR144
    Other Motorcycles:
    WR250F, TRANSALP
    He had some issues with a loose fly wheel weight a while back. It must have ruined the threads.

    Later,
    jmetteer, Mar 12, 2009
    #5

  6. PC. Husqvarna
    AA Class

    Location:
    Beaverton, OR
    Husqvarna Motorcycle:
    CR165 & CR144
    Other Motorcycles:
    KTM500
    I see. Thank you!
    PC., Mar 12, 2009
    #6

  7. dartyppyt Husqvarna
    Pro Class

    Location:
    Illinois
    Husqvarna Motorcycle:
    17 TE 150, 82CR 500
    Other Motorcycles:
    82 125,250,430&500 79 390 83 250
    I had an 87 430 that I had to split cases on it to replace 3rd gear. When I went to loosen flywheel nut, the thread end of crack snapped off ( I couldn't believe it). I think a crank half was $180+ dollars back then and then the pressing was $35. I took the crank out, put it in a drill press, shimmed in between the rod slot just in case the drill press would press the crank halves closer to rod. Drilled and tapped for a metric bolt. Then used some lock tight and never had one issue. It's a thought. I didn't have any balancing issues.
    dartyppyt, Mar 13, 2009
    #7

  8. fire1998 Husqvarna
    AA Class

    Location:
    Cheyenne, WY
    crank

    Thanks guys, bought the crank today from Bills.
    fire1998, Mar 13, 2009
    #8

  9. Rusty 2 Husqvarna
    A Class

    Location:
    Ashland, KY
    Good to hear,...hope the install goes smooth and you never have another crank issue. :thumbsup:

    That was just wrong what happened to you with that flywheel weight.
    Rusty 2, Mar 14, 2009
    #9

  10. fire1998 Husqvarna
    AA Class

    Location:
    Cheyenne, WY
    crank

    Got the bill today.
    $200 for crank
    $466 for labor and new flywheel
    $100 for shipping

    Total $766 for a loose flywheel!!! :banghead::censored::censored::censored::censored:
    fire1998, Mar 25, 2009
    #10

  11. Coffee CH Owner

    Location:
    Between homes - in ft Wayne IN
    Husqvarna Motorcycle:
    2006 TE250, 2013 TR650 Terra - sold
    Not a fun price, ouch!





    Clearly this is a where can I buy thread so I changed the title a bit to reflect that.
    Coffee, Mar 25, 2009
    #11