X2 light on TE Husqvarnas

Discussion in 'Motosportz' started by Dust_Buster, Jan 15, 2010.

  1. Dust_Buster Husqvarna
    B Class

    Location:
    Santa Rosa
    I'm interested in what people have done for the lower mounting on Trailtech X2 lights for late model TE's. I'm much better at copying than creating.

    Thanks
    Dust_Buster, Jan 15, 2010
    #1

  2. Norcalslowpoke Husqvarna
    AA Class

    I got out the hacksaw and cut some of the black fender support away.

    IIRC, maybe an 1.5" or so.

    Does not look too bad, but I'm not that picky.
    Norcalslowpoke, Jan 21, 2010
    #2

  3. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    - Remove the fender brace and use the plate with pins

    - Screw the plate with pins to the top of the fender brace (makes the light a little high)

    - Use the down pins and drill holes in the fender brace for them
    Motosportz, Jan 21, 2010
    #3

  4. ElDiablo Husqvarna
    B Class

    I skipped the pins and the light is perfect.
    ElDiablo, Jan 26, 2010
    #4

  5. jeffchri Husqvarna
    B Class

    Location:
    Seattle, WA
    It certainly works okay without the pins, but I found the light angle too low and too movable with bumps. The pins solve that.
    jeffchri, Jan 28, 2010
    #5

  6. Zestymac Husqvarna
    A Class

    Location:
    Joisey
    X2

    This thread needs PICS!!!:thumbsup:
    Zestymac, Jan 28, 2010
    #6

  7. ElDiablo Husqvarna
    B Class

    It depends what you ride. For me riding at night in the desert and standing up was perfect. I never hit more than 50mph. In slow technical it was great too as you need a lot of light right in front of you. I also plugged it in directly to the battery so both lights can be on. However when I tun them both off the battery overcharge light comes on.
    ElDiablo, Jan 28, 2010
    #7