Your favorite PCV for 2008-2012 Husqvarna Mikuni ECU models

I have a couple of questions regarding the PCV I don't know what map comes in the Powercommander V #23-009. My bike is a 2011 TE310
How do you connect a map switch? do you connect the switch to both map inputs using all four pins?

If I'm understanding this correctly, it looks like you plug a 2 way switch using 2 wires into the map 1 and map 2 posts. When you move the switch it will default to map 2?
I was confused because a 2 way switch only has 2 wires and thought there were 4 map ports. Now I understand that the software makes the change assisted by the switch instead of a hardware connection making all the changes.

Thanks Mathew525, you settled it quickly!

I neglected to include the word map in my title. It should have read,
Your favorite PCV " Map"

For any, 2008 thru 2012 250, 310, 450 or 510 model with a Mikuni ECU

Basically if you hooked a wire from map port to map port you would select map 2.
With no jumper map 1.

Any latch open closed switch will work. I used a cheap RadioShack one.

If you mean, my favorite map is my local dude who was adjust my pc v in dyno..But if you need some maps, here is few
http://www.cafehusky.com/threads/power-commander-maps.4401/