• Husqvarna Motorcycles Made In Sweden - About 1988 and older

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

1982 125 XC Compression

Chaz955i

Chaz955i

Husqvarna
A Class
Hi All,
Anyone know what the compression should be on an 82 125 xc? I saw another thread where someone posted 150 for a 2010 but not sure if the numbers are different on the older air cooled engines.

Secondly, anyone know who sources pistons or rings for the 125s? Seems 250 and up are available but the small bores only pop up on ebay now and then.

Thanks,
Chuck
 
compression 13.8 at one 1980/1981/1982
compression 13.4 at one 1983
125 HUSQVARNA CR/WR/XC
pistons no problèm !
source in USA = Wiseco
in europe = TECHNUM
standart
+ 0.25
+ 0.50
and others technum...
+ 1.00
........
 
You must log in or register to reply here.
Back
Top