• Husqvarna Motorcycles Made In Sweden - About 1988 and older

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

1983 CR 250 Somme questions

F

flyingJoan

Husqvarna
Ignition advance ? for this motorcycle 10º 0.6 mm looks small advance.Anybody could inform if you have setUp this .My motorcycle have Moto plat 63mm iner rotor

Which oil do you usee for Front Fork SAE 10? im leaving in Spain and is not soo cool.

Thanks in advance if somme body could heelp my
 
flyingJoan said:
Ignition advance ? for this motorcycle 10º 0.6 mm looks small advance.Anybody could inform if you have setUp this .My motorcycle have Moto plat 63mm iner rotor

Which oil do you usee for Front Fork SAE 10? im leaving in Spain and is not soo cool.

Thanks in advance if somme body could heelp my
Click to expand...

Advance is 20 degrees or 2.55mm BTDC. Original specification for fork oil is 15wt. Good luck with your project and post pictures!
 
Thanks !!!
In the Technical Data Cr 250 1984 and 1985 the advance is 10º and the rotor is the samme Motoplat ineer rotor 63 mm .
Why this big diference in the advance?
 
You are correct, it does say 10 degree, but the BTDC measurement is stil 2.55mm. Most people i know use a dial indicator to measure piston location relative to BTDC.
 
You must log in or register to reply here.
Back
Top