• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Barnett Clutch Cable

jerbear610

jerbear610

Husqvarna
Pro Class
I just got a Barnett Clutch Cable and the ball end that connects to
the arm down on the motor is bigger than the stock cable so I'm
wondering if anyone else has used these and if so how do you connect it
to the arm? Here's a pic of the two. Jerry
 

Attachments

  • Clutch cable.jpg
    Clutch cable.jpg
    90.5 KB · Views: 50
Make sure you check the alignment of the bracket that holds the cable to the clutch arm. Some brackets were mfg slightly out of alignment (mine) which caused the early failure. Also add a small dab of grease to the ball end, check the slot on the clutch lever for interference/drag when the lever is pulled in and you should be GTG :thumbsup:
 
You must log in or register to reply here.
Back
Top