• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

GPR exhaust pipe diameter

risinqsun

risinqsun

Husqvarna
A Class
Hey guys,

does somebody know the measurements shown in the picture or is able to measure it out real quick?
I need outer diameter of the pipe that attaches to the adapting pipe with the can.
And I need outer and inner diameter of both sides of the adapting pipe.

GPR.png

Would be awesome.

Greetings from Germany,

Flo
 
That would be really awesome!
German GPR is not able to feed me with said infos.. And italy takes its time to respond..
 
Worst case I'll give the info on monday, the pipe is already off the bike, I'm just far from said bike :P
 
The iD of the adaptor is 1.750 inches or 44.5 mm. This is where the pipe slips in.
The OD is 2.125 or 54mm. This is where the adaptor slips into the GPR, which of course is also 54 mm ID.

The outer diameter of the pipe is the same 1.750 as above. This is the pipe that slips into the adaptor.

What are you up to with this?
 
Thanks MatLax, Fab was faster^^

FabOneUp said:
The iD of the adaptor is 1.750 inches or 44.5 mm. This is where the pipe slips in.
The OD is 2.125 or 54mm. This is where the adaptor slips into the GPR, which of course is also 54 mm ID.

The outer diameter of the pipe is the same 1.750 as above. This is the pipe that slips into the adaptor.

What are you up to with this?
Click to expand...

Thanks for your measurements!
Have a look at this, mate, I explained everything over there (further down) http://www.cafehusky.com/threads/rally-fairing-and-other-accessories.88010/.

Greetings,

Flo
 
You must log in or register to reply here.
Back
Top