• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Have lighting kit, need wiring diagram :)

Sandgroper

Sandgroper

Husqvarna
AA Class
Just purchased a aftermarket headlight and tail light for the 510TXC.

Anyone know where I can get info on wiring it up?

:notworthy:
 
Do you mean a specific diagram for the lighting kit you bought, or do you just want the '09 TXC wiring diagram? If the latter, it can be found in the owners manual. If you don't have the owners manual, let me know and I'll post a copy of the diagram for you.
 
I think i have a wiring diagram but to be honest I havent got a clue on how to wire it up to anything other than the battery with a switch for both in between.
:)
 
Ahh, okay. I'm not really sure how you would do it.

Did it come with a regulator? Actually, since you have a battery, I guess you have the e-start kit, so you would already have a regulator.

I would e-mail or call the manufacturer of the lighting kit.
 
good thinking. dont like my chances of getting reply but lets see. Otherwise its back to basics and connect it to the battery with a relay and switch

thanks
;)
 
Just hooked up lights to our TXC. Under the tank is a convenient empty plug with three wires...red, yellow and blue. Blue is ground. Red is 12V that is backed up by the battery. Yellow is 12V that is regulated but not battery. If you want to be able to run the light with the bike off, hook your power wire up to the red...but you'll need a switch to turn the light off. If you want it to only run with the bike on, hook it up to the yellow. Connect the ground wire from the headlight to the ground wire on the bike (blue). I'm no electrical expert, but that's what worked for us.
 
I saved this from the info on installing the tail light from the kit with the 2008 TE's.

If using the rear light that came with the power up kit it goes like this,,,,or this is what you'll need to get it all wired up. On the connector on the bike the wires go like this.....the red with the black stripe is the + for the right turn signal..... there is no black wire.... the blue wire is the ground for all the lights including the turn signals.....the lite blue is the + for the left turn signal....the yellow wire is for the running lights....and the green wire is for the brake light....


Now for the light itself......the red wire is the brake light.....the black is the ground..... and the yellow is the running light..........this info is from an 08 TE450...

Edit...I used this to install mine, so it works for 2008's for sure.
 
You must log in or register to reply here.
Back
Top