• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Help Identifying Metallic Flakes In Oil

Shea

Shea

Husqvarna
B Class
Hey all, hoping someone with more mechanical experience can take a look at these photos to help me identify what I would consider a substantial amount of metallic/ magnetic flakes found on sump plug magnet during oil change.

Info on these flakes:
- They seem to be magnetized. ie: they are attracted to the pliers i was using to sort them for the attached photo.
- Quite thin and brittle (easilly can break into almost dust just by squeezing in fingers)
- The larger pieces have an almost welding slag look to them.
- I am unsure if the brown if rust or the metal, as I cleaned them with brake cleaner immediately before taking the photo.
- The biggest piece is approximately 6-7mm diameter, but there is a fair bit more small dust size that got trapped in the oil filter.
- The past 2 oil changes (at 27,xxx kms and 30,xxx kms) have revealed flakes of the same look and quantity.

My research suggests possibly a bearing, However I just replaced all the transmission bearings last summer, and everything else (crankshaft, clutch, flywheel, counter shaft) spin smoothly by hand, not indicating that there is an issue there. Top end all looks good as well. All of the trans gears and bushings also looked fine when I had the case split last summer.

I am at a loss, and am also bringing them into my local bike shop to see if they have any suggestions. But any pointers would be greatly appreciated. I absolutely loveee this bike but if this continues on the next oil change I might have to consider selling it.

Photos link
 
Unfortunately I can't be more specific, but I remember more than one person mentioning something fastened to the flywheel having a tendency to shatter: maybe you could remove the LH side crankcase cover and take a look.
 
in any case- you need to do a total teardown, clean and inspect of every single tiny little part. some of that stuff is burnt, some looks rusty, some is fine patriculate.
a bearing/bush/thrust washer let go or something is rubbing on something else causing high-temp frags to get everywhere. (bottom end, clutch/flywheel rivets, etc....). i aint gona sugar coat this one, you will need a total and complete 100% PAN overhaul. those pics indicate major internal damages. big time.
if the cam saddles and caps are ok, yay. if not...new head time. check valve stems for scoring too. trash the pump and all the lines. trash everything you cant get a q-tip into as metal will be hiding there.

sorry man, something went KB a while ago....it's a bad one.
 
You must log in or register to reply here.
Back
Top