Husqvarna TE310 exhaust shield/guard

[davids70]

Does anyone know oem part number of this exhaust plastic guard and/or where to get it ?
Thanks.

 

[Mike-AK]

No, but the stock shield part number is: 8000 H5396

 

[robertaccio]

I have the hard parts catalogs but not with me at the moment and have seen that plastic one, I think its in the 2013 catalog.
anyway from the 2012 catalog here is the CarbonFiber one manufactured by Leo Vince P/N 8000H4102

 

[reveille]

There is a carbon fiber version out there as well but I called Hall's and Husqvarna stopped producing them. I went through this a while back. Here's a link http://www.cafehusky.com/threads/te310-carbon-fiber-mid-pipe-heat-shield-pictures.41367/

 

[davids70]

Thanks for the answers.
Mike, I have the stock metal shield.
I've seen the leovince carbon shield and these P3 carbon shields.
http://p3carbon.com/product-category/boot-guards/husqvarna-bg/
http://p3carbon.com/product-category/heat-shields/husqvarna-hs/

They are pretty sexy and lightweigh, but expensive.
That's what I'm looking for: lightweight. I saw that plastic one surfing the net and I think it has to be much more cheaper. I can't find the bloody part ... I'll keep searching ..

 

[robertaccio]

Edit----I have the hard parts catalogs but not with me at the moment and have seen that plastic one, I think its in the 2012 catalog, Cant find the older catalog
anyway from the 2013 catalog here is the CarbonFiber one manufactured by Leo Vince for Husky Rear heat shield carbon P/N 8000H4102 MY09-13

 

[Mike-AK]

Edit----I have the hard parts catalogs but not with me at the moment and have seen that plastic one, I think its in the 2012 catalog, Cant find the older catalog
anyway from the 2013 catalog here is the CarbonFiber one manufactured by Leo Vince for Husky Rear heat shield carbon P/N 8000H4102 MY09-13

The one in the 2012 catalog is the carbon one. Same PN.

 

[robertaccio]

That black plastic one (which I remember seeing) must be in the 2011 (or 2010?) catalog then?

 

[shilo020]

The P3carbon does work well and the heat shield means no more burned pants.

 

[robertaccio]

Here's a shot of the OEM hardparts (LeoVince) Carbon fiber one P/N 8000H4102 on my 2011 TE310 Race bike, stock header with TC250 Ti (ultra lite) muffler with dB-S/A plug installed. This bike is still going strong with her new owner.