• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Husqvarna TR 650 Terra | Play in clutch actuator

risinqsun

Husqvarna
A Class
Hey guys,

I'm currently checking over my engine. While removing my clutch discs, I discovered that the actuator rack of the clutch mechanism has lot's of play in the bearing.

I measured the bearing, it's 15 mm inside (like it's supposed to be).

The shaft itself is only 14 mm, but doesn't show any signs of wear.

Is this correct like it is? With 1 mm of play, it moves around a lot. Yes, it will be centered by the clutch cover hole, but I just wanted to verify that this is normal.

See the pictures for a better understanding.

20190531_153825.jpg
20190531_160932.jpg

Thanks a lot,
Flo
 
Hey guys,

I'm currently checking over my engine. While removing my clutch discs, I discovered that the actuator rack of the clutch mechanism has lot's of play in the bearing.

I measured the bearing, it's 15 mm inside (like it's supposed to be).

The shaft itself is only 14 mm, but doesn't show any signs of wear.

Is this correct like it is? With 1 mm of play, it moves around a lot. Yes, it will be centered by the clutch cover hole, but I just wanted to verify that this is normal.

See the pictures for a better understanding.

View attachment 95935
View attachment 95936

Thanks a lot,
Flo


That's perfectly normal, i just checked on a spare clutch. The bearing only receives axial load. Voll normaaal ey....
 
Back
Top