• Husqvarna Motorcycles Made In Sweden - About 1988 and older

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

I dun screwed up

Caden

Caden

Husqvarna
C Class
Can someone point me in the direction of a gasket for my 1983 250 cr. It's the gasket for the left side of the transmission. I tried to make it. But I failed. You guys are abundant and resourceful any help will be appreciated.
 
Here's a link to some part sources

http://www.cafehusky.com/threads/vintage-husqvarna-1970-1980-parts-sources.8/


　

　
Husqvarna-Parts Arizona

Contact: Phillip
Location: Arizona,USA

Webaddress/link : http://www.husqvarna-parts.com/page/page/3737813.htm



Halls-Cycle's Springfield, Illinois

http://www.halls-cycles.com/


Or in a pinch just use high grade gasket maker compound , I had my off so much a few years ago I would have went through
1/2 dozen gaskets...

https://www.permatex.com/product-category/gasketing/gasket-makers/
 
Yep, I use golden hermetite on the cover, and just grease the other. I get several "uses" out of a gasket (not that I'm tight ;))
 
Thanks guys it was the really old gasket though and need to be replaced I called halls and it's on the way to my house thank you
 
You must log in or register to reply here.
Back
Top